Meta Ads
/
Meta Ads vs Google Ads for Contractors in BC: Which Should You Run First?
By Built Tough Marketing
On Meta ads vs Google Ads for contractors, the short answer is this: run Google Ads first if your customers need you today, and run Meta ads first if they have to see the job before they want it. A burst pipe in Chilliwack gets typed into Google. A new patio in Abbotsford gets noticed on Facebook, months before anyone searches for a contractor. The two platforms find customers in opposite ways, so the right first choice for a BC trades business depends on what you sell, not on which one is cheaper.
TL;DR
Google Ads shows your ad to someone who is already searching for the service. Meta shows your ad to someone who wasn’t looking.
Urgent, need-it-now trades like plumbing, HVAC repair and electrical usually start with Google. Visual, planned projects like landscaping, decks, painting and renovations can start with Meta.
LocaliQ’s 2026 benchmarks list an average cost per lead of $90.92 for home improvement on search ads and $42.95 on Facebook lead campaigns. Those leads are not the same thing.
Compare the two on cost per booked job, not cost per lead.
Whichever goes first, the page the ad lands on and how fast you call back decide whether it pays.
How each platform finds your customer
Everything else in the meta ads vs google ads for contractors question comes back to this one difference.
Google Ads answers a search
Google’s help page on keywords in Search campaigns puts it plainly: “Keywords are words or phrases that are used to match your ads” to what people search for. A homeowner in Langley types “furnace not working,” your ad enters an auction, and if it wins a spot she sees it while the problem is still in front of her.
She came to you, with a need and a timeline. That’s why search leads tend to be ready to book.
The limit is that you can only reach people who search. If nobody in Hope typed “retaining wall contractor” this week, no budget will make them appear.
Meta ads interrupt a scroll
Facebook and Instagram work the other way around. Nobody opens Instagram to find a roofer. Meta’s page on ad auctions says an auction runs “each time there’s an opportunity to show an ad to someone,” and you choose who’s eligible by defining an audience, like homeowners within a set distance of Mission.
To work, your ad has to stop someone who wasn’t thinking about their yard and make them think about it. That takes a real photo or video of finished work, a clear offer and a reason to act.
The strength is reach. You can put your work in front of homeowners across your service area, including the ones who would never have searched. The weakness is timing. Most of them aren’t ready today.
What the benchmarks say each one costs
Nobody publishes ad data just for BC trades. The closest public numbers come from LocaliQ, a US marketing company that reports averages by industry. For the Home & Home Improvement category:
Search ads. LocaliQ’s 2026 Search Advertising Benchmarks list an average cost per click of $8.33, a conversion rate of 8.05% and a cost per lead of $90.92.
Facebook lead campaigns. LocaliQ’s 2026 Facebook Advertising Benchmarks list an average cost per click of $2.18, a conversion rate of 5.32% and a cost per lead of $42.95.
Read those with three cautions. The search report blends Google Ads and Microsoft Ads. Neither report says which country the data covers, so treat the dollar figures as a reference point, not a BC price list. And both are averages across every kind of home service.
On paper, Facebook leads cost less than half as much. That’s the number that sends a lot of contractors to Meta first, and it’s the wrong number to decide on.
A lead is not a job. A search lead typed in a problem and picked you. A Facebook lead tapped a form while scrolling on the couch. The only fair comparison is cost per booked job.
Here’s the method, with made-up numbers only to show the math. Say a Surrey contractor pays $90 a lead on search and books one in four. That’s $360 per job. Say the same contractor pays $45 a lead on Facebook and books one in ten. That’s $450 per job. The cheaper lead was the more expensive job. Flip the close rates and the answer flips too, which is why you need your own numbers. We go deeper on each side in what Facebook ads cost for contractors in BC and what Google Ads cost for contractors in BC.
Which should a Fraser Valley contractor run first?
Start with the kind of job you want more of, then check your market.
Start with Google Ads if the job is urgent or needed
Plumbing, drain cleaning, HVAC repair, electrical service calls, roof leaks, emergency excavation.
The homeowner can’t wait, so they search, and they call the first company that looks credible.
You serve an area with enough people that the searches exist. Surrey, Langley and Abbotsford have that volume for most trades.
Start with Meta ads if the job is visual or planned
Landscaping, decks and fences, exterior painting, concrete driveways and patios, kitchen and bathroom renovations.
The homeowner has been thinking about it for a year. A strong before-and-after can be the push.
You have real photos and video of your own work. Without them, Meta is an uphill fight.
Your town is small. In Agassiz or Hope, there may be very few searches for your trade in a given month, but plenty of homeowners scroll Facebook or Instagram every day.
A search campaign in a small market can run out of people to show to. Reaching the whole town is part of what Meta ads for contractors are good at.
Your budget changes the answer too
Meta’s delivery system needs volume before it settles. Its page on the learning phase says ad sets usually exit learning “after about 50 results in the week after the ad set’s last significant edit,” and that performance is less stable before then. A small budget split across both platforms often means neither one gets enough data to work. Pick one, fund it properly for a full season, then add the second.
What has to be in place before you spend on either
Neither platform fixes what happens after the click. Before the first dollar goes out, check four things.
One service, one page. Send the ad to a page about the job in the ad, with your phone number and a short form at the top. Not your homepage.
Tracking. You should be able to see which calls and forms came from the ad. If you can’t, you’re comparing platforms on a hunch.
Fast follow-up. A homeowner who filled out a form on her phone at 8 p.m. has forgotten about it by lunch tomorrow. Call or text within minutes.
Proof. Reviews on your Google listing and photos of real jobs. People from both platforms check you out before they book.
How the two work together once the first is paying
This isn’t an either-or decision forever. It’s a question of order.
Search catches, Meta reminds. Someone searches, clicks your Google ad, reads your page and leaves without calling. A Meta ad can put your work back in front of them for the next few weeks. We cover that in Facebook retargeting for contractors.
Meta warms, search closes. A homeowner in Chilliwack sees your deck photos on Instagram in March. In May she searches “deck builder Chilliwack” and recognizes your name in the results.
Add the second platform when the first has a cost per booked job you understand and can live with.
Frequently asked questions
Is it better for a contractor to advertise on Facebook or Google?
It depends on the job. Google is usually better for urgent work, because the homeowner is already searching. Facebook and Instagram are usually better for planned, visual projects, because you can show the finished result to people who weren’t looking yet.
Are Facebook ads cheaper than Google Ads for contractors?
Per lead, the benchmarks say yes. LocaliQ’s 2026 reports list $42.95 per lead for home improvement on Facebook lead campaigns and $90.92 on search ads. Per booked job, it depends on how many of those leads you close, so track both.
Do Facebook ads work for contractors in smaller BC towns like Chilliwack, Mission or Hope?
They can, and sometimes better than search. Small towns have few searches for any one trade, but plenty of homeowners use Facebook or Instagram. A local ad with real job photos can reach households that a search campaign never would.
Should a contractor run Google Ads and Meta ads at the same time?
Not at the start, unless the budget can fund both properly. Get one platform producing booked jobs at a cost you understand, then add the other.
The bottom line
Meta ads vs Google Ads for contractors isn’t about which platform is better. Google catches the homeowner who needs you now. Meta puts your work in front of the homeowner who’ll need you later. Pick the one that matches the jobs you want, fund it properly, send it to a page built for that job, and call every lead back fast. Then judge it on booked jobs.
If you’d rather have that built and run as one system, with the ads, the page and the follow-up working together, see our Meta ads management for contractors in BC. Marketing that works as hard as you do.
Related playbooks
Ready to put this to work?
Book a free, no-pressure marketing audit. We’ll show you exactly where the jobs are leaking, and how to fix it.
